Top » Catalog » Bagloader » Bag Loader » Vacuum & Cups » 7002015

$0.00

Bagloader vacuum sensor switch digital read out
[7002015]

Vacuum sensor switch
  Adjustable set-points for high/low vacuum
  Digital vacuum level readout
  24V DC 3 wire operation.

Application
  Bag loader vacuum check.  Used on latter model bagloaders
  Will not work on earlier bagloaders unless 24VDC powers available
Checks that there is good vacuum.  If vacuum drops below a certain level the bag will be aborted.
Reviews
Categories
AT2001 Network
Bagloader-> (37)
  AT2001 Network
  Bag Loader-> (10)
    Air Cylinders & Valves (7)
    Electrical (1)
    Mechanical Components
    Vacuum & Cups (1)
  Conveyors (7)
  MAC Valves
  Metric Air Fittings & Hoses->
  Metric Nuts & Bolts->
  Modugas - Gas Pack Filler (8)
  Neck Stretcher / Bag Presenter
  Refurbished Assemblies (1)
  Sapac Rotary Fillers (2)
  Sapac Sealer (5)
Conveyors
MAC Valves
Metric Air Fittings & Hoses
Metric Nuts & Bolts
Modugas Gas Pack Filler->
Neck Stretcher / Bag Presenter->
Refurbished Assemblies
Rotary Filler->
Sapac Rotary Fillers
Sapac Sealer
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
What's New?
Loadcell Sapac weigh head complete with plug, dust cover and dri
Loadcell Sapac weigh head complete with plug, dust cover and dri
$980.00
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
We Accept
Shopping Cart
6 x Norgren Lintra Sensor
5 x Cylinder Position Sensor
3 x Fiber optic amplifier for bag leveler sensor
4 x Cylinder Sensor
2 x Encoder 100 pulse, Hollow shaft, Probe, outfeed conveyor C/W plu
3 x Mercury interface complete, bracket, housing and sealed mercury
2 x Closed loop motor encoder, 1000 pulse 6mm shaft, complete with p
2 x Loadcell Sapac weigh head complete with plug, dust cover and dri
1 x Lamp and contact module mounting base ,Telemecanique push button
2 x Encoder 250 pulse Hollow shaft, Modugas weigh head C/W plug Bau
2 x Coupling flexible for sealer encoder
2 x Encoder Sealer postion counter C/W plug 60 pulse
2 x Load cell silicon cover boot
2 x Encoder replacement clamp ring
2 x 
2 x Sensor bracket for Norgren 32mm dia round cylinder
1 x Sensor bracket for Norgren 20mm dia round cylinder
1 x Sensor bracket for Norgren 25mm dia round cylinder
2 x Mounting bracket for bag sensor photo eye
1 x Diagraph photocell sensor for printer
2 x Sensor cable 4 pin M12 angled connector C/W 5m cable IFM
1 x Conveyor photo eye diffision sensor
2 x Lever/wand arm for limit switch
2 x IFM 18mm sensor swivel mounting bracket only
1 x Limit Switch - Sissor lift Position XCKD2118P16
2 x Proximity sensor 18mm 2 Wire type. fixed leads
2 x Proximity sensor, 8mm Voltage Type AC/DC, Supply Voltage 20-264
2 x Pressure switch sealer heating element interlock. (Old Style)
1 x Encoder carousal rotation 1000 pulse hollow shaft complete with
2 x Norgen Sensor Cable
2 x Norgen Lintra Sensor Plug In Type
1 x Sensor cylinder reed switch IFM lintra cylinder
1 x Sensor Cylinder Reed Switch IFM
1 x Bagloader vacuum sensor switch digital read out
1 x Clamp bracket 2 piece for sensor 7001010
1 x Norgren Sensor bracket for 7001010
$14,025,394.21
Notifications
NotificationsNotify me of updates to Bagloader vacuum sensor switch digital read out
Share Product
Share via E-Mail
Share on Twitter
Reviews
Write ReviewWrite a review on this product!

Copyright © 2024 MoriceInc.com
Powered by osCommerce

osCommerce