$7,002,012.00

Pressure switch sealer heating element interlock. (Old Style)

Pressure sensor.
  12-24V
  DC 3 wire.
  0-1 Mpa

Used as pressure interlock on sealer glue reactivation element.
If there is not enough air pressure to enable this switch, the element will not heat up.
This unit was used on the earlier model sealers. Check to ensure this is the correct type
Reviews
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
4 x Limit Switch - Sissor lift Position XCKD2118P16
4 x IFM 18mm sensor swivel mounting bracket only
4 x Encoder replacement clamp ring
3 x Sensor cable 4 pin M12 angled connector C/W 5m cable IFM
4 x Encoder 100 pulse, Hollow shaft, Probe, outfeed conveyor C/W plu
4 x Load cell silicon cover boot
3 x Lever/wand arm for limit switch
3 x Conveyor photo eye diffision sensor
3 x Proximity sensor 18mm 2 Wire type. fixed leads
4 x Pressure switch sealer heating element interlock. (Old Style)
4 x Coupling flexible for sealer encoder
3 x Proximity sensor, 8mm Voltage Type AC/DC, Supply Voltage 20-264
4 x Encoder Sealer postion counter C/W plug 60 pulse
3 x 
1 x Encoder carousal rotation 1000 pulse hollow shaft complete with
2 x Mercury interface complete, bracket, housing and sealed mercury
4 x Fiber optic amplifier for bag leveler sensor
2 x Norgen Sensor Cable
4 x Diagraph photocell sensor for printer
4 x Cylinder Sensor
4 x Sensor bracket for Norgren 25mm dia round cylinder
4 x Encoder 250 pulse Hollow shaft, Modugas weigh head C/W plug Bau
4 x Sensor bracket for Norgren 32mm dia round cylinder
1 x Sensor Cylinder Reed Switch IFM
4 x Sensor bracket for Norgren 20mm dia round cylinder
2 x Sensor cylinder reed switch IFM lintra cylinder
3 x Norgen Lintra Sensor Plug In Type
5 x Norgren Lintra Sensor
4 x Cylinder Position Sensor
4 x Closed loop motor encoder, 1000 pulse 6mm shaft, complete with p
4 x Mounting bracket for bag sensor photo eye
4 x Loadcell Sapac weigh head complete with plug, dust cover and dri
1 x Norgren Sensor bracket for 7001010
1 x Clamp bracket 2 piece for sensor 7001010
1 x Norgren Sensor bracket for 7010011
2 x Lamp and contact module mounting base ,Telemecanique push button
1 x Bagloader vacuum sensor switch digital read out
$28,036,666.27
Share Product
Share via E-Mail
Share on Twitter
osCommerce