Top » Catalog » Bagloader » Bag Loader » Vacuum & Cups » 7002015

$0.00

Bagloader vacuum sensor switch digital read out
[7002015]

Vacuum sensor switch
  Adjustable set-points for high/low vacuum
  Digital vacuum level readout
  24V DC 3 wire operation.

Application
  Bag loader vacuum check.  Used on latter model bagloaders
  Will not work on earlier bagloaders unless 24VDC powers available
Checks that there is good vacuum.  If vacuum drops below a certain level the bag will be aborted.
Reviews
Categories
AT2001 Network
Bagloader-> (37)
  AT2001 Network
  Bag Loader-> (10)
    Air Cylinders & Valves (7)
    Electrical (1)
    Mechanical Components
    Vacuum & Cups (1)
  Conveyors (7)
  MAC Valves
  Metric Air Fittings & Hoses->
  Metric Nuts & Bolts->
  Modugas - Gas Pack Filler (8)
  Neck Stretcher / Bag Presenter
  Refurbished Assemblies (1)
  Sapac Rotary Fillers (2)
  Sapac Sealer (5)
Conveyors
MAC Valves
Metric Air Fittings & Hoses
Metric Nuts & Bolts
Modugas Gas Pack Filler->
Neck Stretcher / Bag Presenter->
Refurbished Assemblies
Rotary Filler->
Sapac Rotary Fillers
Sapac Sealer
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
What's New?
Encoder replacement clamp ring
Encoder replacement clamp ring
$0.00
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
We Accept
Shopping Cart
4 x Cylinder Position Sensor
3 x Coupling flexible for sealer encoder
3 x Encoder Sealer postion counter C/W plug 60 pulse
2 x Proximity sensor, 8mm Voltage Type AC/DC, Supply Voltage 20-264
2 x Pressure switch sealer heating element interlock. (Old Style)
2 x Proximity sensor 18mm 2 Wire type. fixed leads
3 x Mercury interface complete, bracket, housing and sealed mercury
3 x Encoder carousal rotation 1000 pulse hollow shaft complete with
4 x Encoder 100 pulse, Hollow shaft, Probe, outfeed conveyor C/W plu
4 x Encoder replacement clamp ring
4 x Loadcell Sapac weigh head complete with plug, dust cover and dri
4 x Load cell silicon cover boot
4 x Encoder 250 pulse Hollow shaft, Modugas weigh head C/W plug Bau
4 x Closed loop motor encoder, 1000 pulse 6mm shaft, complete with p
1 x Lamp and contact module mounting base ,Telemecanique push button
4 x Norgen Sensor Cable
5 x Norgen Lintra Sensor Plug In Type
3 x Cylinder Sensor
3 x Sensor bracket for Norgren 20mm dia round cylinder
2 x IFM 18mm sensor swivel mounting bracket only
1 x Limit Switch - Sissor lift Position XCKD2118P16
1 x Sensor cable 4 pin M12 angled connector C/W 5m cable IFM
1 x Fiber optic amplifier for bag leveler sensor
1 x Conveyor photo eye diffision sensor
1 x Lever/wand arm for limit switch
2 x Bagloader vacuum sensor switch digital read out
2 x Diagraph photocell sensor for printer
2 x Norgren Sensor bracket for 7001010
2 x Sensor bracket for Norgren 25mm dia round cylinder
1 x Sensor cylinder reed switch IFM lintra cylinder
1 x Clamp bracket 2 piece for sensor 7001010
1 x Sensor Cylinder Reed Switch IFM
2 x Mounting bracket for bag sensor photo eye
1 x Norgren Sensor bracket for 7010011
3 x Norgren Lintra Sensor
2 x Sensor bracket for Norgren 32mm dia round cylinder
$14,033,922.75
Notifications
NotificationsNotify me of updates to Bagloader vacuum sensor switch digital read out
Share Product
Share via E-Mail
Share on Twitter
Reviews
Write ReviewWrite a review on this product!

Copyright © 2024 MoriceInc.com
Powered by osCommerce

osCommerce